Service, Repair and Calibration for Industrial Tools
We provide repair, preventive servicing, torque calibration on equipment traceable to UKAS standards, DC electric tooling service and on-site HAV testing for industrial pneumatic and electric assembly tools across the UK. All work is carried out under our ISO 9001 quality management system from our service centre in Kenilworth, with an established presence across the South and South East.
Distributor, service centre and calibration laboratory under one roof
Leading Premier UK Distributor and approved service centre
We are a Leading Premier UK Distributor for Atlas Copco and a UK distributor for Delta Regis, Tecna balancers and Fiam, with access to other industrial brands. Approved Atlas Copco service centre. Genuine OEM parts, direct manufacturer access, factory-trained engineers.
UKAS-traceable calibration
Our in-house calibration equipment is traceable to UKAS standards, with every certificate traceable to the National Physical Laboratory. Certificates are accepted under ISO 9001, IATF 16949 and AS9100.
40+ years servicing production tooling
We have serviced industrial pneumatic and electric assembly tools since the early 1980s, across automotive, aerospace, rail, electronics and general engineering. That depth of experience applies to every job that comes through the depot.
Services
All services are available on a contract or one-off basis. A free written quote is issued within 24 hours for repair, or two working days for calibration and HAV testing.
Air Tool Service
Scheduled preventive servicing to maintain factory performance and prevent unplanned downtime. Full strip-and-rebuild, genuine OEM parts, torque verification, service history logged by serial number. Workshop or on-site.
- Full strip-and-rebuild
- Torque verification
- Workshop or on-site
- Service history by serial number
Air Tool Repair
Strip-down diagnosis and rebuild for any make of industrial pneumatic or electric tool. Free fault diagnosis, written fixed-price quote within 24 hours, genuine parts, post-repair test on every job. 3-month warranty on work carried out*. 48-hour express turnaround available for production-critical breakdowns.
- Free fault diagnosis
- Fixed-price quote within 24 hours
- 3-month warranty on work carried out*
- Post-repair test before return
Repair and Service by Brand
Approved service centre for Atlas Copco, Fiam and Delta Regis. Trained and competent on all major makes including Chicago Pneumatic, Desoutter, Ingersoll Rand, Kolver, Delvo/Nitto Kohki, ATA, Cleco, Gesipa, Trelawny and Universal Air Tools.
DC and Electric Tooling Service, Repair and Calibration
Service, repair and UKAS-traceable calibration for DC electric nutrunners, screwdrivers and controllers. All major brands, Atlas Copco Tensor series, Delta Regis, Kolver, Delvo/Nitto Kohki, Desoutter, Ingersoll Rand, Cleco. Post-repair torque verification on every DC tool. RCM maintenance programmes available.
- Service and repair all major DC brands
- Post-repair torque verification
- UKAS-traceable calibration
- RCM maintenance programmes
HAV Testing Services
On-site Hand Arm Vibration testing to the Control of Vibration at Work Regulations 2005. Per-tool certificates, operator exposure assessment at EAV (2.5 m/s² A(8)) and ELV (5 m/s² A(8)), full management report and action plan issued within five working days.
- Per-tool HAV certificate
- Operator exposure assessment
- HSE-ready management report
- Action plan included
Tool Calibration and Certification
torque calibration on equipment traceable to UKAS standards for all makes of power tool and hand torque tool. Certificates traceable to NPL. Accepted under ISO 9001, IATF 16949 and AS9100. Same-day certificates available for laboratory calibrations. On-site calibration available UK-wide.
- Equipment traceable to UKAS standards
- NPL-traceable certificates
- All makes of power tool and hand tool
- On-site or laboratory
*Warranty covers the work carried out by us. Terms apply.
How a service contract works
All contracts are structured around your tool inventory and production schedule. The process is the same whether you run 10 tools or 500.
- 01
Tool register
We log every tool by serial number, location and use classification. You have a current record of everything in the inventory.
- 02
Service schedule
Intervals are set per tool based on type, duty cycle and application, not a single fixed calendar interval applied across the inventory.
- 03
On-site visit or workshop service
Our engineers arrive with a parts kit specific to your tool inventory. Repair, calibration and HAV testing can be carried out in a single visit where the schedule allows.
- 04
Documentation
Written service report and calibration certificates issued within 48 hours of each visit.
Industries we work with
Automotive assembly
Torque-critical fastening, line-side tooling, IATF 16949 calibration requirements.
Aerospace
AS9100 calibration, NPL-traceable certificates, controlled-environment servicing.
Rail and commercial vehicles
Heavy-duty impact and pulse tools. On-site service to minimise tool downtime.
Electronics and PCB assembly
High-cycle electric screwdrivers, low-torque calibration, precision assembly tooling.
White goods and appliance manufacture
Mixed pneumatic and DC electric tool inventories, volume servicing, scheduled maintenance.
Energy and utilities
Field-service tooling, HAV exposure management, on-site testing for mobile crews.
General engineering and fabrication
Pneumatic and electric tool inventories, preventive servicing and reactive repair.
Request a service quote
Send us your tool count and sector and we will respond with an indicative service plan and price within two working days. All quotes are free of charge.